Wilson carries several types of In-Building Wireless 50 dB Amplifier Systems that are designed for homes, smaller offices and buildings. The amplifiers work with any cell phone or cellular data card. The Cellular 50 dB Amplifier improves signals on the Cellular (824-894 MHz) band and works with Verizon, US Cellular, Cellular One, Alltel, Bell Canada, Telus, Cingular and all other 800 MHz Cellular carriers.

This model requires at least one outside antenna, one inside antenna and two cables to connect the antennas to the amplifier. The cables must be long enough to separate the two antennas by a minimum of 40 feet (See Installation Instructions for specific details).

● Works on all generations of CDMA, TDMA, GSM and high-speed data technologies.
● Improves data communication rates needed for 3G
● Automatic gain control up to 50 dB
● 2 dB gain step 30-50 dB
● Automatic gain adjusting in the event of oscillation and/or overload.
● Power control logic ensures maximum output power is within cellular network standards
● Gain indicator lights
● Automatic shutdown on overload
● FCC and IC type accepted

Specifications

Max RF

Noise Figure

Flatness

Click Here For Installation Instructions