| | |
|
| |
| | |
|
|
Wilson Electronics
Wilson Trucker Spring Antenna and Mount (308433)
The Wilson Trucker Spring Antenna and Mount (308433) is a dual band antenna with 5.12 / 6.12 dB of gain.
In Stock
|
The Wilson 'Trucker' Spring Antenna and Mount (308433) is a dual band antenna with 5.12 / 6.12 dB of gain. It can be used with one of the amplifiers on our site, or connect directly to your phone with an adapter cable. The antenna is made of stainless steel and is fully weather-proof. |
|
| The Wilson 308433 is an omni-directional antenna. Omni-directional antennas receive signal from all directions, and so the antenna needs to be installed in a vertical position in the area of strongest signal. The Wilson 308433 uses a Standard CB 3/8 inch x 24 thread mount. The 901104 3-way mount allows the antenna to be connected to a horizontal bar up to 1/2" thick, which is perfect for attachment to a building roof or a truck side mirror.
|
|
● Dual-Band
● Between 5 and 6 dbi Gain (depending on frequency)
● Ideal for use in homes, boats, RV's and trucks
● Includes both the 'Trucker' antenna (part 3018433) and the 3-way mount (901104)
● Not only for trucks! Using the included mount the trucker antenna can attach to any pole or horizontal bar
● Works with CDMA and GSM voice signals and also EVDO, HSDPA, UMTS and EDGE data transfer services
● No technical experience necessary for installation
|
|
|
Specifications |
|
|
|
Part Number |
|
308401 |
|
Frequency |
|
806-894MHz /1850-1990MHz |
|
Impedence |
|
50 Ohms |
|
Antenna Gain |
|
5.12dBi (806-894MHz), 6.12dBi (1850-1990MHz) |
|
Polarization |
|
Vertical |
|
Material |
|
Whip - Stainless Steel |
|
Radiation |
|
Omni |
|
Ground Plane |
|
Built In |
|
Connector |
|
FME Female |
|
Coax Cable |
|
RG58 - 13.5 feet |
|
Height |
|
21.5 (inches) |
|
Mount |
|
Standard CB 3/8 inch x 24 thread |
|
|
|
|