| | |
|
| |
| | |
|
|
Wilson Electronics
Wilson SIGNALBOOST DB PRO Amplifier (801262)
The SIGNALBOOST DB Pro cellular amplifier kit significantly improves the performance of any cellular device on any network (except Nextel*) experiencing weak signal inside of buildings.
In Stock
|
The SIGNALBOOST DB Pro cellular amplifier kit significantly improves the performance of any cellular device on any network (except Nextel*) experiencing weak signal inside of buildings. Installation simplicity without sacrificing performance highlights this product. An optional external omni-directional gain antenna with multiple mounting options eliminates researching cell site locations and antenna pointing. The optional inside panel antenna which rebroadcasts the amplified signal is designed for optional in-wall mounting. All components are interconnected using provided standard TV cable (RG-6) which is easily available and often found pre-installed, simplifying cable runs. |
|
|
The Wilson Cellular 801262 SignalBoost DT Pro Desktop Amplifier is designed to provide coverage up to 15 ft from the unit. This model requires at least one outside antenna, one inside antenna and two cables to connect the antennas to the amplifier. The cables must be long enough to separate the two antennas by a minimum of 40 feet (See Installation Instructions for specific details). |
|
● Works on
all generations of CDMA, TDMA, GSM.
● Works in any inside location where improved cellular signal is needed: homes, offices, buildings
● Increases data communication rates needed for 3G technologies
● Designed for use with standard TV cable common in many homes
● Extends cell phone battery life
● Significantly improves voice and data quality
● Greatly reduces disconnects and drop-outs
● Multiple cell phones and data cards can be amplified simultaneously
● FCC and IC type accepted |
|
|
Specifications |
|
|
|
Part Number |
|
801105 |
|
Frequency |
|
824-849 MHz / 1850-1990 MHz |
|
Gain |
|
62 dB / 62 dB |
|
Max Output Power |
|
2.5 watts |
|
Max RF |
|
34 dBm / 15.7 dBm |
|
Noise Figure |
|
3.5 dB nominal |
|
Flatness |
|
±5 dB |
|
Isolation |
|
> 90 dB |
|
Power Requirements |
|
120-240 V AC, 50-60 Hz, 8 W max |
|
Connectors |
|
F-Female |
|
Dimensions |
|
6.2 x 4.2 x 1.5 (inches) / 15.7 x 10.7 x 3.8 (cm) |
|
Weight |
|
0.64 lbs / 0.29 kg |
|
|
|
Click Here For Installation Instructions |
|
You
will need the free Adobe Acrobat Reader
to view/print
these forms.
download it here
>> |
 |
|
|
|
Applications |
 |
|
|
|