| | |
|
| |
| | |
|
|
Wilson Electronics
Wilson In-Building Wireless Cellular 65 dB Amplifier Kit (841365)
The Wilson In-Building Wireless Cellular 65 dB Amplifier Kit (841365) is designed to improve cell reception on the 1900 MHz frequency in large buildings and warehouses.
In Stock
|
The Wilson In-Building Wireless Cellular 65 dB Amplifier (801365) is the most powerful amplifier offered by Wilson Electronics; the 65dB of gain can can be used to cover a large area, or can compensate for very weak donor signal in areas with particularly poor signal. When combined with antennas and cables to form a complete kit, the Wilson Electronics 801165 Amplifier can cover areas up to 10,000 sq ft. An additional pre-amplifier can increase the coverage area to 15,000 sq ft. |
|
The external donor antenna is placed in the area of best signal (usually outside, or on top of the building). This antenna collects cellular signal and sends it through a cable to the amplifier. The Wilson 801365 amplifier boosts the signal, and then sends the amplified signal through a cable to the indoor antenna. The total coverage area depends on the donor signal strength and the antennas (and any pre-amplifiers) used. The Wilson 801365 amplifier can be used by up to 15 phones or data cards simultaneously.
Package contents include: Wilson 65 dB 1900 MHz Cellular Amplifier (801365), Outside 800 MHz Yagi Antenna, Indoor Panel Antenna, 50' Wilson 400 Coax Cable, and a 30' Wilson 400 Coax Cable. |
|
● Works with all generations of CDMA, TDMA, GSM and high-speed data technologies.
● Improves data communication rates needed for 3G technologies.
● Power control logic ensures maximum output power is within cellular network standards.
● Oscillation protection and shutdown auto reset.
● Up to 3-watt power amplifier.
● Automatic shutdown on overload.
● Automatic gain adjusting in the event of oscillation and/or overload.
● Automatic gain control up to 65 dB.
● FCC and IC type accepted |
|
|
Specifications |
|
|
|
Part Number |
|
841365 |
|
Frequency |
|
1850-1910 MHz, 1930-1990 MHz |
|
Gain |
|
65 dB |
|
Max Output Power |
|
2 watts |
|
Max RF |
|
+ 30 dBm / + 30 dBm |
|
Noise Figure |
|
4 dB typical |
|
Flatness |
|
± 4 dB |
|
Isolation |
|
> 90 dB |
|
Power Requirements |
|
Input: 100-240 V AC 50/60 Hz 0.6 A / Output: 6 V DC 3 A |
|
Connectors |
|
N-Female 50 ohms |
|
Dimensions |
|
5.6 x 3.6 x 1.7 (inches) / 14.2 x 9.1 x 4.4 (cm) |
|
Weight |
|
1.5 lbs / 0.7 kg |
|
|
|
Click Here For Installation Instructions |
|
You
will need the free Adobe Acrobat Reader
to view/print
these forms.
download it here
>> |
 |
|
|
|
Applications |
 |
|
|
|